Ram Module - Panasonic CF-73 Series Reference Manual

RAM Module

Inserting/Removing the RAM Module
Use a RAM module meeting the RAM module specifications below. If a module is used that
does not meet the specifications, there are cases in which data may become unusable or the
computer may not operate properly.
RAM module specifications:
200 pins, SO-DIMM, 1.8 V, DDR2 SDRAM, PC2-3200
(For information on the RAM modules that can be used, contact Panasonic Technical
Support.)
*1
A PC2-4200-compliant RAM module can also be used, but it operates at the same speed as the
PC2-3200-compliant RAM module.
CAUTION
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such modules.
When inserting or removing a RAM module, do not touch the terminals or internal
components, insert objects other than the module, or allow foreign particles to enter.
Doing so has been known to cause damage, fire or electric shock.
CAUTION
If the RAM module is difficult to insert or difficult to press down, do not force it. Check
once more to ensure that the module is positioned correctly.
Use the proper size screw driver to insure that the screw does not get stripped.
1
Power off your computer.
(⇒ Operating Instructions "Starting Up/Shutting Down")
Do not use the standby or hibernation function.
Disconnect the AC adaptor. Turn the computer over and remove the battery
*2
pack . ( page
*2
If the second battery pack is inserted in the multimedia pocket, remove it, too.
40)
81
*1