Ipad Wi-Fi Settings; Using Dhcp - Yamaha M7CL StageMix V5 User Manual

Yamaha Professional Audio
3.2

iPad Wi-Fi Settings

The iPad can be configured using either DHCP or a Static IP address.
3.2.1

Using DHCP

Dynamic Host Configuration Protocol (DHCP) is a network protocol that
enables a server to automatically assign an IP address to a device.
Use the following steps to configure your iPad using DHCP.
a) Open the iPad "Settings" menu
b) Select "Wi-Fi", and choose the correct network
c) Press the blue circle with the white arrow to the right of the selected
network to edit the IP address.
d) Select [DHCP] and ensure that your iPad receives data for the IP
Address, Subnet Mask, Router and DNS.
e) Select [Renew Lease] if this data is not applied.
f) If the settings are successfully applied, press the iPad's Home
button to exit the Settings menu.
Note:
• Make sure that the subnet of the IP address is the same as that of
the M7CL console.
• If DHCP settings are not applied after step (e), please check your
DHCP server settings (refer to
setup your iPad using a Static IP Address.
M7CL StageMix V5 User Guide
10.4 for further advice). Alternatively,
Page 7