Horizon Fitness adventure 1 Assembly Manual page 5

ASSEMBLY STEP 3 (Adventure 7)
Adventure
7
shown
D
C
B
8
8
HZ15_AG_Adv_1_3_5_7_r1_0.indd 8-9
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION
B BOLT M6X1.0PX15L
Φ6.2XΦ18.0X1.5T
C ARC WASHER
Φ6.1XΦ12.2X1.5T
D SPRING WASHER
9
A Open HARDWARE FOR STEP 3.
B Slide HANDLEBARS (8) onto CONSOLE (9).
C Attach HANDLEBARS (8) to CONSOLE (9)
using 3 BOLTS (B), 3 ARC WASHERS (C)
and 3 SPRING WASHERS (D) from each
side.
ASSEMBLY STEP 4 (Adventure 7)
QTY
6
E
6
F
6
H
G
9
1
HARDWARE FOR STEP 4
PART TYPE
E BOLT
F SPRING WASHER
G FLAT WASHER
H ARC WASHER
A Open HARDWARE FOR STEP 4.
B Gently place CONSOLE (9) on top of
CONSOLE MASTS (1&6).
10
C Connect the CONSOLE CABLES (10) and
ensure they are tucked inside the CONSOLE
(9).
D Connect the CONSOLE (9) to the right
6 CONSOLE MAST (6) using 2 BOLTS (E),
2 SPRING WASHERS (F) and 2 FLAT
WASHERS (G) from the inside of the mast
and 1 BOLT (E), 1 SPRING WASHER (F)
and 1 ARC WASHER (H) from the front of
the mast.
E Repeat STEP D on left side.
F Tighten all CONSOLE MAST BOLTS (A) in step
1&2 completely.
DESCRIPTION QTY
M8X1.25PX20L 6
Adventure
Φ8.2XΦ13.5X2.0T
6
7
shown
Φ8.2XΦ15X1.2T
4
Φ8.2XΦ18.0X1.5T
2
9
7/13/15 2:41 PM