KNOW YOUR BLOWER/VAC
Auxiliary
handle
Blower tube
ASSEMBLY INSTRUCTIONS
WARNING:
bag must be used when operating this unit.
NOTE: The blower tube and the vac tubes and bag are not assembled on this unit. Installation
is required to provide safe and easy use for the operator.
WARNING:
position, it is unplugged, and the impellers have stopped before attaching or
removing tubes.
Assemble as a blower
1. Turn off unit and unplug from electric outlet.
2. Attach the blower tubes to the unit by sliding the large end of the blower tube into the blower
outlet. Push the blower tube "B" to "A" until "B" has locked into place (see Fig. 2).
3. Press the lock button until the tube locks firmly into place (see Fig. 3).
B
Lock button
Vac tubes
To avoid serious personal injury, the blower tube or vac tubes and
To prevent serious personal injury, make sure the unit is in the OFF
A
Fig. 2
- 6 -
Switch
Lock button
Co
rd
Bag
Fig. 1
Fig. 3