SHERCO 2012 SE 250i-R Shop Manual page 33

Checking the center crankcases: Checking the center crankcases:
•
Inspect the general condition of the Inspect the general condition of the
center crankcases for wear and cracks. center crankcases for wear and cracks.
Replace the center crankcase if necessary. Replace the center crankcase if
•
Inspect the condition of all the bearings. Inspect the condition of all the bearings.
Replace the bearings if necessary. Replace the bearings if necessary.
•
Inspect the condition of the crankshaft Inspect the condition of the crankshaft
bearings.
Replace the crankshaft bearings if necessary. the crankshaft bearings if necessary.
•
To remove the bearings, install tool To remove the bearings, install tool
number R464, heat the tool and the bearing. number R464, heat the tool and the bearing.
•
Remove the bearing.
The radial play in the roller bearings must The radial play in the roller bearings must
be practically zero.
32/54