Lifescan Sure Step Flexx Quick Refence Manual page 27

Error 2 Test Strip:
Cause: Meter detected problem with test strip.
Solution:
1.Repeat test with new test strip and
• Check test strip expiration date. Do not use if
expired or beyond discard date.
• Apply sample to pink test square only.
• Make sure confirmation dot turns completely
blue.
• Wait approximately 1 min but not more than 2 min
after applying sample before inserting test strip.
• Do not alter test strips.
2.If you continue to get any error message,
obtain a laboratory result, and
• Compare color of test strip confirmation dot
to Color Chart on test strip bottle to see if
glucose level is very high or very low.
• Take appropriate steps to monitor patient
and provide medical care while awaiting
laboratory result.
3.Clean meter and repeat test with new test strip.
4.Contact LifeScan for help at 1 800 524-7226.
24