Lifescan Sure Step Flexx Quick Refence Manual page 31

Error 6 System Error:
Cause: Meter detected problem with electronics.
Solution:
1.Wipe contact points with cloth moistened
with water to remove residual bleach. Dry
thoroughly, but
NOTE: Before cleaning, compare color of test
strip confirmation dot to Color Chart on test
strip bottle. If glucose level is very high or very
low, take appropriate steps to monitor patient
and provide medical care.
• Repeat test with new test strip.
• Make sure test strip lot number (and code)
entered at meter matches number on test
strip bottle.
2.If you continue to get any error message,
obtain a laboratory result. Take appropriate
steps to monitor patient and provide medical
care while awaiting laboratory result.
3.Contact LifeScan for help at 1 800 524-7226.
28