Description - Intec MGC2-16 User Manual

PolyGard Multi-Point Controller
®
User Manual - MGC2-16
Multi Point Controller MGC2
1

Description

®
The PolyGard Multi Point Controller MGC2 is used for the monitoring and warning of sensor points exceeding
their stage setpoints. External Transmitters can monitor and warn of toxic, combustible and refrigerant gases as
well as temperature and humidity. The Controller MGC2 can measure up to sixteen analog 4 to 20 mA (Gas)
Transmitters.. Each Sensor Point (SP) can have five stage thresholds. Each stage threshold can be assigned to
anyone of the relays (R1...R20). The Controller can interface via eight 4 to 20 mA outputs to any compatible
electronic analog control, DDC/PLC control or automation system.
The adjustable parameters and staged thresholds make this system very flexible for sensor measuring and
control.
The configuration of parameter settings and operation is easy to do without any programming knowledge.
®
PolyGard Multi Point Controller MGC2 must not be used in areas requiring explosion proof equipment.
Polygard® is a registered trademark of MSR
Customer Services (858) 578-7887 & (888) GO INTEC
INTEC Controls, 12700 Stowe Dr., Suite 100, Poway, CA 92064
Fax (858) 578-4633 & (888) FX INTEC
www.inteccontrols.com
Page 04
Specification subject to change without notice.
Printed in USA 131119
MGC2-16