Installation; Exploded View - Polaris Ranger RZR SW Service Manual

Installation

1. Install lower A-arm assembly onto vehicle frame. Torque
new fasteners to specification.
2. Attach lower A-arm to bearing carrier. Torque new fastener
to specification.
3. Route brake line on top of the lower A-arm and between
lower shock mounting tabs.
4. Reinstall the lower portion of the shock to the lower A-arm.
Torque shock fastener to specification.
5. Install upper A-arm assembly onto vehicle frame. Torque
new fastener to specification.
6. Attach upper A-arm to bearing carrier. Torque new fastener
to specification.
7. Install wheel and torque wheel nuts to specification.
WARNING
Upon A-arm installation completion, test vehicle
at low speeds before putting into service.
Rear Upper / Lower A-arm Bolts:
40 ft. lbs. (54 Nm)
Lower Rear Bearing Carrier Bolts:
40 ft. lbs. (54 Nm)
Shock Mounting Bolts: 30 ft. lbs. (41 Nm)
Upper Rear Bearing Carrier Bolts:
40 ft. lbs. (54 Nm)
= T
= T
= T
= T
BODY / STEERING / SUSPENSION

Exploded View

Upper Fastener
Pivot Tube
Upper
A-arm
Grease
Zerk
Bushings
Pivot
Tube
Upper
Fastener
Bushings
Bearing
Carrier
Lower
Fastener
Lower
Fastener
Bushings
Pivot
Tube
Lower
A-arm
Pivot
Tube
Screws
CV
Shield
5.21
5