Wheel Installation - Polaris M1400 Owner's Manual

Tires

Wheel Installation

1. Place the transmission in PARK. Place the
wheel in the correct position on the wheel
hub. Be sure the valve stem is toward the
outside and rotation arrows on the tire
point toward forward rotation.
WARNING! Improperly installed wheels can
adversely affect tire wear and vehicle handling,
which can result in serious injury or death. Always
ensure that all nuts are torqued to specification. Do
not service axle nuts that have a cotter pin installed.
Your dealer can assist.
2. Attach the wheel nuts and washers and
finger tighten.
3. Carefully lower the vehicle to the ground.
4. Torque the wheel nuts to specification.
Fuses
If the engine stops or will not start, or if you
experience other electrical failures, a fuse may need
replacement. Locate and correct any short circuits
that may have caused the blown fuse, then replace
the fuse.
The fuse box is located in the electrical
compartment under the left rearmost seat. Spare
fuses are provided in the fuse box.
If you suspect that a fuse or relay may not be
working properly, please see your dealer.
Fuse Size
5A
10A
20A EFI, Power Steering (if equipped),
20A Circuit
Breaker
Feature Supported
Brake Light
Drive System, Fuel Pump
Lights, Accessories
Fan
MAINTENANCE
71