[Rotate]/ [Rotate Disp.] - Panasonic DMC-FS20 Lumix Operating Instructions Manual

This mode allows you to automatically display pictures vertically if they were recorded holding
the camera vertically or rotate pictures manually in 90
1
Select [ROTATE] on the [PLAYBACK] mode menu.
•
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
2 Move 2/1 to select the picture and then press [MENU/
SET].
•
Motion pictures and protected pictures cannot be rotated.
3 Move 3/4 to select the direction to rotate the picture
and then press [MENU/SET].
: The picture rotates clockwise in steps of 90
: The picture rotates anticlockwise in steps of 90
4
Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
Rotate display (The picture is automatically rotated and displayed)
1
Select [ROTATE DISP.] on the [PLAYBACK] mode menu.
2
Move 4 to select [ON] and then press [MENU/SET].
•
The pictures are displayed without being rotated when you select
[OFF].
•
Refer to P46
3
Press [MENU/SET] to close the menu.
Note
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the
OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording
information etc. to be added. It was established by "JEITA (Japan Electronics and Information
Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
Advanced (Playback)

[ROTATE]/ [ROTATE DISP.]

Rotate (The picture is rotated manually)
for information about how to play back pictures.
o
steps.
o
.
o
.
- 106 -
(P25)
(P25)