N [Rotate]/M [Rotate Disp.] - Panasonic Lumix DMC-G1K Operating Instructions Manual

Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90Q steps.
Select [ROTATE] on the [PLAYBACK] mode menu. (P27)
•
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press / to select the picture and then press
[MENU/SET].
•
Protected pictures cannot be rotated.
Press / to select the direction to rotate the
picture and then press [MENU/SET].
:
:
Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
Rotate display (The picture is automatically rotated and displayed)
Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P27)
Press  to select [ON] and then press [MENU/
SET].
•
The pictures are displayed without being rotated when you
select [OFF].
•
Refer to P49 for information about how to play back pictures.
Press [MENU/SET] to close the menu.
Note
•
[ROTATE DISP.] can only be used with the lens compatible (P13) with the direction detection
function (P36).
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
112
VQT1U50

N [ROTATE]/M [ROTATE DISP.]

Rotate (The picture is rotated manually)
The picture rotates clockwise in steps of 90Q.
The picture rotates counter-clockwise in steps of 90Q.