[Aspect Ratio]; [Intelligent Iso] - Panasonic DMC-FS20 Lumix Operating Instructions Manual

For details on [REC] mode menu settings, refer to P25.
This allows you to select the aspect ratio of the pictures to suit printing or the playback method.
Applicable modes:
[X]: [ASPECT RATIO] of a 4:3 TV
[Y]: [ASPECT RATIO] of a 35 mm film camera
[W]: [ASPECT RATIO] of a high-definition TV, etc.
[X]
Note
• The ends of the recorded pictures may be cut at printing
For details on [REC] mode menu settings, refer to P25.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimise the jitter of the subject.
Applicable modes:
ISOMAX ISOMAX
[OFF]/[ ]/[ ]/[
400 800
•
The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
•
Movements may not be detected when a moving subject is small, when a moving subject is at the
edge of the screen or when a subject has moved at the very moment when the shutter button was
pressed fully.
•
To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting
[COLOR MODE] to [NATURAL].
Advanced (Recording pictures)

[ASPECT RATIO]

ñ·½¾n
[Y] (still pictures only)

[INTELLIGENT ISO]

·
ISOMAX
]
1600
(P89)
check before printing.
so
- 81 -
[W]
(P141)