[Rotate]/[Rotate Disp.] - Panasonic DMC-FX35 Operating Instructions Manual

This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
1
Select [ROTATE] on the [PLAYBACK] mode menu.
•
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
2
Press 2/1 to select the picture and then press
[MENU/SET].
•
Motion pictures and protected pictures cannot be rotated.
3 Press 3/4 to select the direction to rotate the
picture and then press [MENU/SET].
: The picture rotates clockwise in steps of 90o.
: The picture rotates counter-clockwise in steps of 90o.
4
Press [‚] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
Rotate display (The picture is automatically rotated and displayed)
1
Select [ROTATE DISP.] on the [PLAYBACK] mode menu.
2
Press 4 to select [ON] and then press [MENU/SET].
•
The pictures are displayed without being rotated when you select
[OFF].
•
Refer to P44
3
Press [MENU/SET] to close the menu.
Note
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
Advanced (Playback)

[ROTATE]/[ROTATE DISP.]

Rotate (The picture is rotated manually)
for information about how to play back pictures.
- 112 -
(P24)
(P24)