Lcd Monitor - Panasonic DMC-FS20 Lumix Operating Instructions Manual

The LCD monitor turns off although the camera is turned on.
•
The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF]
for the [ECONOMY] mode.
[This does not happen when using the AC adaptor (optional).]
If the remaining battery power is low, it may take longer for the flash to be charged, and the time
during which the LCD monitor is turned off may become longer.
The LCD monitor becomes darker or brighter for a moment.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value and
does not affect the recorded pictures.
The LCD monitor flickers indoors.
•
The LCD monitor may flicker for a few seconds after turning the camera on indoors under fluorescent
light. This is not a malfunction.
The LCD monitor is too bright or dark.
> Adjust the brightness of the screen.
•
[POWER LCD] or [HIGH ANGLE] is activated.
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect
the pictures you are recording.
The flash is not activated.
•
Is the flash setting set to [Œ]?
> Change the flash setting.
•
Flash mode is not available when auto bracket
The flash is activated 2 times.
•
The flash is activated twice when red-eye reduction
Others

LCD monitor

(P28)
(P29)
Flash
(P52)
(P60) or [BURST]
- 138 -
(P87) in [REC] mode menu has been set.
(P53) has been set.
(P30) is selected