Compensating The Exposure - Panasonic DMC-FS20 Lumix Operating Instructions Manual

·½¾n
[REC] mode:

Compensating the Exposure

Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Under exposed
Compensate the exposure towards
positive.
1
Move 3 [È] until [EXPOSURE] appears,
compensate the exposure with 2/1.
•
Select [0 EV] to return to the original exposure.
2
Press [MENU/SET] to finish.
•
You can also press the shutter button halfway to finish.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by the
aperture value and the shutter speed.
• The exposure compensation value appears on the lower left of the screen.
•
The set exposure value is memorised even if the camera is turned off.
•
The compensation range of the exposure will be limited depending on the brightness of the subject.
Advanced (Recording pictures)
Properly
exposed
Compensate the exposure towards
negative.
- 59 -
Overexposed