Panasonic DMC-FS20 Lumix Operating Instructions Manual page 109

∫ Cancelling all the [DPOF PRINT] settings
1
Select [CANCEL] on the screen shown in step
2
Move 3 to select [YES] and then press [MENU/SET].
3
Press [MENU/SET] to close the menu.
•
You cannot select [CANCEL] if not even one picture has been set for DPOF printing.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISPLAY].
• When you go to a photo printing store for digital printing, be sure to order the printing of the date
additionally if required.
•
Depending on the photo printing store or the printer, the date may not be printed even if you set to
print the date. For further information, ask at your photo printing store or refer to the operating
instructions for the printer.
• The date cannot be printed on pictures stamped with text.
•
If you set [TEXT STAMP] for pictures that have been set for date printing, the date printing setting is
cancelled.
Note
•
The number of prints can be set from 0 to 999.
•
With a printer supporting PictBridge, the date print settings of the printer may take precedence so
check if this is the case.
•
It may not be possible to use the DPOF print settings with other equipment. In this case, cancel all
the settings, and reset the settings.
•
If the file is not based on the DCF standard, the DPOF print setting cannot be set.
Advanced (Playback)
2
and then press [MENU/SET].
- 109 -