Panasonic DMC-FS20 Lumix Operating Instructions Manual page 141

The picture does not appear on the television.
•
Is the camera connected to the TV correctly?
> Set the TV input to external input mode.
The display areas on the TV screen and the camera's LCD monitor are different.
•
Depending on the TV model, the pictures may be extended horizontally or vertically or they may be
displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?
> Connect the camera to the TV with the AV cable (supplied) and then play back the pictures on
the camera. (P121)
The picture is not displayed fully on the TV.
> Check [TV ASPECT] setting.
The picture cannot be transferred when the camera is connected to a PC.
•
Is the camera connected to the PC correctly?
•
Is the camera recognised by the PC correctly?
> Set to [PC] in [USB MODE]. (P32,
The card is not recognised by the PC. (The built-in memory is recognised.)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.
The picture cannot be printed when the camera is connected to a printer.
•
Pictures cannot be printed using a printer which does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB MODE]. (P32,
The ends of the pictures are cut at printing.
> When using a printer with a trimming or borderless printing function, cancel this function before
printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be printed
with both ends.
Others
TV, PC and printer
(P32)
112)
115)
- 141 -