Ultra Start 25 series Install Manual page 9

REMOTE VEHICLE STARTER
Wiring Descriptions
Pin
13-WHITE Park Light(+)
14-BLACK/ Parking Brake(-)
WHITE
AUXILIARY CONNECTOR (4pin white)*
Pin
1-WHITE/GREEN
2-BLACK
3-WHITE/BLUE
4-RED
TEMP SENSOR* or INSTANT START CONNECTOR (2pin white)
ANTENNA CONNECTOR (4pin Blue)
LOCK/ UNLOCK CONNECTOR (4pin red)
Pin
1-GREEN
2-RED 12volts -
3-BLUE
4-PINK 2nd Unlock(-)
AUXILIARY SENSOR CONNECTOR (4pin white)
Pin
1-BLUE Pre-warn Input(-)
2-GREEN Full-warn Input(-)
3-BLACK Ground Output(-)
4-RED 12Volt Output(-)
AUXILIARY CONNECTOR (3pin white)
Pin
1-GREEN Horn(-)
2-PINK Auxiliary #6(-)
3-BLUE Disconnect(+)
Function
- 10amp positive output to activate park lights.
Function
LED(-)
Dome Light(-)
Siren(+) -
Trunk Input(-)
*LT series ONLY.
RF Antenna with Program Button and LEDs
Function
Lock(-)
- Programmable 250ma LOCK output. (Menu 1)
250ma 12volt output for relays.
Unlock(-)
- Programmable 250ma UNLOCK output
- Output when
Function
Function
- 250ma horn output. Programmable auxiliary #5 output.
- 250ma auxiliary #6 output.
- Positive disconnect. Programmable positive start input.
Description
Programmable output (menu 2)
- Input to detect (-) when parking brake switch is applied.
- External LED Output.
- 250ma dome light supervision output.
Output to activate siren. (Menu 1&2)
- Input to detect (-) when trunk is open.
Description
is pressed twice within three seconds.
Description
- Negative Pre-Warn sensor input.
- Negative Full-Warn sensor input.
- Negative 250ma Output for optional sensor.
- 12V 250ma Output for optional sensor.
Description
INSTALL MANUAL
Description
PAGE 9