Component/Feature List - Ultra Start 25 series Install Manual

REMOTE VEHICLE STARTER
Components
- Control module
- Antenna with built in
Program Button and LEDs
- 14 pin auxiliary harness
- 4 pin keyless entry harness
- 4 pin auxiliary sensor harness
- Install and Owner Guides
Feature List
- Auto Tach (Tachless, TL series only) learning with Quick Learn
- Run Time: 4/15/45 minutes
- Door locks: .125s/.75s/3s/double unlock/ignition lock/unlock
- Siren output 5ms/10ms/50ms
- Timer or Cold Start (LT series) with 4 different start intervals
- Programmable Wait to Start or (+/-) diesel Glow plug input
- Ground While Running/Anti-grind protection/Starter kill
- System Override Protection/Service Mode (Valet)
- Park light/LED diagnostics
- PadLoc/ Dual car operation
- up to 4 different transmitter codes
- Panic mode
- Car Finder mode
Please read manual thoroughly.
If the vehicle is a MANUAL TRANSMISSION, a "M" series
remote starter must be installed. Any model number followed
by the letter "M" is specially designed for MANUAL
TRANSMISSION vehicles. The "M" series remote starter will
not work in an AUTOMATIC TRANSMISSION vehicle.
- 4 button remote transmitter's*
- 6 button remote transmitter's**
- 6 pin Main harness
- 4 pin auxiliary harness
- 2 pin LT/instant Start harness
- Multi-tone Siren
- Hood Pin
- Engine Idle mode
- Turbo Timer mode
INSTALL MANUAL
PAGE 3
*25xx series
**26xx series