Image Ftp; Search And Playback - Qvis APOLLOC4-500 Quick Start Manual

2.5.1.3 Priority
Please note the activation snapshot has the highest priority over the schedule snapshot. If
you have enabled these two types at the same time, system can activate the activation
snapshot when alarm is triggered, otherwise system just operates the schedule snapshot.

2.5.2 Image FTP

In Network interface, you can set FTP server information. Please enable FTP functi on and
then click save button. See Figure 2-10. Please refer to the User's Manual included in the
resource CD for detailed information.
Please boot up the corresponding FTP server.
Please enable schedule snapshot or activation snapshot (Chapter 2.3.3) and then system
can upload the image file to the FTP server.

2.6 Search and Playback

Click search button in the main menu, search interface is shown as below. See Figure 2-11.
Usually there are three file types:

R: Regular recording file.

A: External alarm recording file.

M: Motion detection recording file
Copyright Qvis ®. All documentation rights reserved.
Figure 2-10
Please input the corresponding
information here, if you just
upload the image FTP.
19