Sleep Mode Auto Operation - Panasonic CS-W12CTP Service Manual

CS-W12CTP CU-W12CTP5 / CS-W18CTP CU-W18CTP5 / CS-W24CTP CU-W24CTP5
Present
Mode
Cooling
Soft Dry
Heating
Automatic Set Temperature
Refer 3. as below.
3. Automatic Set Temperature
For each operation, set temperature will automatically set as shown below.
However it can be selected 2°C higher or 2°C lower from standard set temperature by pressing the "Room Temperature Setting
button".
• • • • The mode judging temperature and standard setting temperature can be increased by 2°C, by open the circuit of JX6 at
indoor electronic controller.
7.5.

Sleep Mode Auto Operation

Cooling or Soft Dry Operation
Purpose is to obtain a comfortable room temperature while
sleeping. When you press the SLEEP Mode, the following
movement will start to avoid overcooling.
• • • • Sleep shift operation starts, when the room temperature
reaches the setting temperature or after 1 hour of operation.
• • • • The setting temperature will be risen by 0.5°C at the start of
operation and by 0.5°C one hour later .
• • • • The airflow volume will automatically change to Lo- fan
speed.
• • • • Sleep Mode operation time is 8 hours, the operation will be
stop after 8 hour.
• • • • When used together with the Timer, the Timer has priority.
Judgement
23°C Cooling
Heating
23°C Soft Dry
Heating
Cooling
23°C Heating
Operation
Cooling
Soft Dry
Heating
Next Mode
Cooling
O
(Judgement: Not Applicable
23°C & Above)
Not Applicable (Judgement:
23°C & Above)
O
(Judgement: Not Applicable
23°C & Above)
Hi (Standard)
(+2°C) (±0°C)
27°C 25°C
24°C 22°C
23°C 21°C
32
Soft Dry Heating
O
(Judgement:
Below 23°C)
O O
(Judgement:
Below 23°C)
O
(Judgement:
Below 23°C)
Lo
(-2°C)
23°C
20°C
19°C