All Group Scang; (Ltr Trunked Operation Only); System Scang; Operation Only) - Motorola HT1250.LS+ User Manual

ALL GROUP SCAN
G

(LTR TRUNKED OPERATION ONLY)

With All Group Scan, your radio scans all
talkgroups within the selected LTR Trunked
zone.
When All Group Scan is enabled:
• The display shows G.
• The LED indicator blinks green; it stops
blinking when your radio switches to an
active talkgroup.
Note: If you enter Menu mode while your radio
is scanning, scanning stops. The radio
resumes scanning when you exit Menu
mode.
To start All Group Scan, press the
preprogrammed All Group Scan button (see
page 18) once.
To stop All Group Scan, press the
preprogrammed All Group Scan button again.
–or–
To start or stop All Group Scan Operation
through the menu:
1 to enter Menu mode.
)
2 + or ? until
3 ) to select
You see the current scan status.
4 + or ? until
–or–
5 ) to confirm your selection.
SYSTEM SCAN
G
(LTR TRUNKED AND CONVENTIONAL

OPERATION ONLY)

System Scan scans Trunked talkgroups and
Conventional channels between LTR and
Conventional zones, as programmed by your
dealer. Up to 16 different talkgroups or
Conventional channels can be programmed
into each Scan list. You can edit these lists
through your radio's menu (see page 67).
All Group Scan
All Group Scan
All Group On?
All Group Off?
65
English