Sending A Message - Motorola HT1250.LS+ User Manual

SENDING A MESSAGE

This feature gives you the ability to send and
receive preprogrammed messages. Data
messages make more efficient use of channels
compared to voice transmissions. Your dealer
can program your radio with messages of up to
14 characters.
To send an Electronic (Data) Message
1 ) to enter Menu mode.
2 y or z until
3 ) to select
4 y or z to locate the desired message in
the preprogrammed list.
–or–
when using the enhanced keypad microphone
only, enter the number of the message you
wish to send.
–or–
if programmed by your dealer (see page 19),
press the button that has been
preprogrammed for a specific message.
Note: You cannot re-transmit the current
message update.
5
:
Message
Message
Press the PTT button.
You see Msg In Prog
Note: If the radio is not able to send the
message or the radio does not
receive an acknowledgement if an
one is expected,
you see
No Acknowledge
If the radio is
not able to send the message and
no acknowledgement is expected,
you see
No Channel
57
English