Sending A Call Alert Using The One-Touch Button - Motorola HT1250.LS+ User Manual

Sending a Call Alert using the One-Touch
Button
1 Press and hold the preprogrammed One-
touch button.
• The LED indicator lights steady yellow.
• The display shows
2 The Call Alert is sent automatically.
• The LED indicator lights steady red.
3 • While the Call Alert is being established
• Once the Call Alert is established the
•
• If the Call Alert cannot be established,
40
English
F and the
preprogrammed alias or ID is displayed.
Your radio sounds a continuous tone (if
programmed by your dealer).
the F blinks and the LED indicator blinks
red momentarily.
displays solid.
If preprogrammed by your dealer, your
radio sounds a short high-pitched tone
(page established tone) to indicate that the
page was successful.
you see:
No Acknowledge
for 5 seconds. The LED indicator turns off.
• If all channels are busy while attempting a
Call Alert,
you see:
and will hear a delayed busy tone as long
as the PTT button is pressed.
If the PTT button is kept pressed and the
system frees up a channel, the radio
automatically attempts to re-establish the
call.
• ( to end the Call Alert and revert to
talkgroup dispatch, or press the
preprogrammed Call Alert button. You can
then manually re-initiate the call. (See Step
1.)
F
4 ( to end the Call Alert.
System Busy