Receiving A Message; Sending An Emergency Alerte; (Conventional And Ltr Modes Only) - Motorola HT1250.LS+ User Manual

RECEIVING A MESSAGE

When your radio receives a message:
• You hear two alert tones.
• The yellow LED indicator blinks.
• The display alternately
shows
and the preprogrammed alias.
Note: If you receive a message that is not
programmed into your radio, the display
alternately shows the
following:
SENDING AN EMERGENCY ALERT

(CONVENTIONAL AND LTR MODES ONLY)

In the event of an emergency, you may need to
quickly get the attention of others for help. The
Emergency Alert feature, if programmed by
your dealer, causes your radio to send a
priority Emergency Alert (see page 19) to a
specific radio or dispatch center.
58
English
Msg Received
Message #_
No Alias
E
The display shows E when your radio is in the
Emergency Alert state.
Note: In Conventional mode, Emergency
Alerts have priority over all other calls.
An Emergency Alert can be programmed to do
one of the following:
• show E and sound a tone
–or–
• show E (silent Emergency)
–or–
• activate the microphone so that all activity
can be transmitted (for a predetermined
amount of time).
To activate Emergency Alert, press the
preprogrammed Emergency button.
To cancel Emergency Alert, press and hold the
preprogrammed Emergency button, or press
the PTT button.