Phone; Making A Phone Call Dthrough A Trunked System - Motorola HT1250.LS+ User Manual

PHONE

Your HT1250•LS+ radio allows you to place
and receive telephone calls through Trunked
and Conventional systems (depending on
phone line availability). Telephone calls
through a repeater allow only one person to
speak at a time.
MAKING A PHONE CALL D
THROUGH A TRUNKED SYSTEM
Note: The following instructions assume your
radio has been programmed as follows
by your dealer using Customer
Programming Software (CPS).
• Dial type: Live
• Access/Deaccess type: Immediate Auto
• Tone Span: Timed – 100 ms tone duration
To initiate a Phone Call:
1 Select a Trunked zone and talkgroup that have
been programmed for telephone.
2 ) to enter Menu mode.
–or–
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press and release the Speed Dial button to
use the speed dial feature. Then press the
(1 to 9) key corresponding to the number you
want to call on the Phone list. Or press 0 if you
want to call the last number dialed. Press the
PTT button. A dial tone sounds. Press the PTT
button again to send the phone number.
–or–
For an LTR Trunked system, press and hold
the PTT button while dialing a number. (If your
radio has been programmed for Hot keypad,
this is a radio-wide setting).
3 + or ? until
Phone
4 ) to confirm
Phone
The display shows when you are in Phone
D
mode.
71
English