Auto Group Scang; All Group Scang - Motorola HT1250-LS+ User Manual

+ ?
2 or until
)
3 to select
You see the current scan status.
+ ?
4 or until
–or–
)
5 to confirm your selection.
AUTO GROUP SCAN
(LTR TRUNKED OPERATION ONLY)
Auto Group Scan automatically scans
talkgroups within an LTR Trunked zone as
programmed by your dealer. Auto Group Scan
can be non-prioritized or prioritized:
• Non-prioritized Auto Group Scan
automatically scans all talkgroups
programmed with Auto Group Scan.
• Prioritized Auto Group Scan automatically
scans the selected talkgroup and all lower
four-numbered talkgroups. For example, if
Talkgroups 1, 3, and 4 have been
programmed by your dealer with Auto
Group Scan and Talkgroup 4 is selected,
Pass Grp Scan
Pass Grp Scan
To start Auto Group Scan:
Select a talkgroup that has been programmed
for Auto Group Scan by your dealer.
Note: You do not have to press a
PpGp Scan Off?
PpGp Scan On?
•
•
G
•
To stop Auto Group Scan:
Select a talkgroup that has not been
programmed for Auto Group Scan by your
dealer.
ALL GROUP SCAN
(LTR TRUNKED OPERATION ONLY)
With All Group Scan, your radio scans all
talkgroups within the selected LTR Trunked
zone.
When All Group Scan is enabled:
your radio automatically scans talkgroups
1, 3, and 4, and skips Talkgroup 2.
preprogrammed Scan button.
The display shows G when non-
prioritized Auto Group Scan has been
activated.
The display shows H when prioritized
Auto Group Scan has been activated.
The LED indicator does not light up during
Auto Group Scan.
G
63
English