Sending A Selective Call Using The One-Touch Button - Motorola HT1250.LS+ User Manual

you see:
and a tone sounds (if preprogrammed by your
dealer).
Sending a Selective Call using the One-
Touch Button
1 Press and hold the preprogrammed One-
Touch button.
• The LED indicator lights a steady yellow.
• The display shows
2 The Selective Call is sent automatically.
3 • While the Selective Call is being
• Once the Selective Call is established the
• If preprogrammed by your dealer, your
• If the Selective Call cannot be established,
36
English
Call Ended
F and the
preprogrammed alias or ID is displayed.
established the F blinks and the LED
indicator blinks red momentarily.
F displays solid.
radio sounds a short high-pitched tone (call
established tone) to indicate that you are
ready to engage in a conversation.
you see:
No Acknowledge
for 5 seconds. The LED indicator turns off.
• If all channels are busy while
attempting a Selective Call,
you see:
System Busy
and will hear a delayed busy tone as long
as the PTT button is pressed.
If the PTT button is kept pressed and the
system frees up a channel, the radio
automatically attempts to re-establish the
call.
• ( to end the Selective Call and revert
to talkgroup dispatch, or press the
preprogrammed Selective Call button. You
can then manually re-initiate the call. (See
Step 1.)
4 Press the PTT button to talk; release to listen.
5 ( to end the Selective Call.
If the Selective Call has prematurely ended,
Call Ended
you see: