Rack Mounting - Icom IC-A200 Installation Instructions Manual

RACK MOUNTING
I Transceiver i nstal lation
1) Visually confirm that the metal catch on the top of the
transceiver is as shown in Fig. 1.
2) Slowly insert the transceiver into the mounting rack.
3) Insert a 3132 in allen wrench into the hole in the front
panel.
4) Rotate the wrench clockwise until the screw stops.
o DO NOT overtighten the screw.
I Transceiver removal
The lC-A200 is easily removed from the mounting rack, if
required.
1) f nsert a 3132in allen wrench into the hole in the front
panel as shown in Fig. 2.
2) Rotate the wrench counterclockwise until the front
panel moves slightly from the mounting rack as
shown in Fig. 2.
3) Slowly pull the transceiver out from the mounting
rack.
Fig. 1
Clockwise : For installation.
Counterclockwise : For removal.
Fig.2