Mounting Hole - Icom IC-A200 Installation Instructions Manual

MOUNTING HOLE
I Notes for
hole
making the mounting
The mounting bracket has 0.64 mm (0,025 in) dimples
built in to the top, the bottom and both sides for proper
spacing.
Mark and cut the mounting holes.
To support the mounting bracket, the rear mounting
bosses should be attached to the airframe.
The lC-A200 can be mounted securely in the supplied
mounting bracket.
Remember to allow adequate space for installation of
cables and connectors.
When installing 2 or more transceivers in a stack, the
mounting trays should be 1.27 mm (0.05 in) apart.
I Mounting rack dimensions
271 mmi10zuszin
I ttote dimensions
;
o
E
E
g)
(Y)
'157
mm: 6 3/16 in
Cut out dimensions for the mounting rack as above.
I Front panel dimensions
.c
N
o
F
E
{
(?)
c:l ""
Allow space for the front panel as above.
161 mm: 6 rr/sz in