200/225 OPTIMAX DTS
DUAL HELM
Installing DTS Command Module and Harness - Single Engine
HARNESS INSTALLATION
•
Locate a routing path for the harness connections so they reach their installation
points.
•
Inspect the routing path to make sure surfaces are free of any sharp edges or burrs
that could cut the harness.
•
Fasten and support the harness with clamps or cable ties along the routing path.
Page 16 / 42
c
c
e
a -
Helm 2 (upper helm)
b -
Helm 1 (lower helm)
c -
14 pin data harness
d
d -
Dual helm adapter (Y harness)
e -
Clamp or cable tie
a
b
3978
90-10234050