Table of Contents
Advertisement
Basic adjustment settings
Power Control
Power Control setting allows you to reduce the display
brightness to save energy.
Power control for AV source
Power save
When set to "Manual" or "Auto", power consumption
is reduced by decreasing backlight brightness.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power Control".
• Power control menu displays.
3
Press a/b to select "Power Save", and then
press ENTER.
[ Power control ... Power Save ]
MENU
Power control
Power Save
No Signal Off
No Operation Off
4
Press c/d to select the desired backlight
brightness, and then press ENTER.
Manual
Auto
NOTE
• When setting to "Auto", the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• Power Save can be set differently for AV input mode and
PC input mode.
LC-37AA1H(E)-e
Setup
[Manual]
[Disable]
[Disable]
[+8]
–8
+8
41
03.11.6, 8:21 AM
41
Advertisement
Chapters
Table of Contents
