Watching A Vcr Image; Connecting A Vcr; Displaying A Vcr Image - Sharp LC-30AA1H Operation Manual

Using external equipment

Watching a VCR image

Connecting a VCR

You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
AVC System (rear view)
INPUT SOURCE
TV
PC
[ Option ... Input Select ]
MENU
(For INPUT2 signal)
46
LC-37AA1H(E)-f
AV cable (commercially available)
S-video cable
(commercially available)
INPUT1
INPUT2
INPUT3
INPUT4
AUTO
S-Video
Video
46
VCR

Displaying a VCR image

To watch a VCR image, select "INPUT2" from the
"INPUT SOURCE" menu using TV/VIDEO/PC on the
remote control unit or INPUT on the Display.
The setting is stored and can be selected in the "INPUT
SOURCE" menu.
NOTE
• Each time TV/VIDEO/PC is pressed, the input source
toggles.
• If the VCR image does not come in clearly, you may need
to change the input signal type setting on the "Input Select"
menu.
• Refer to your VCR operation manual for the signal type.
• See page 54 for how to select the signal type.
03.11.6, 8:23 AM