Selecting The Input Source And Signal Type; Selecting Input Source; Selecting Input Signal Type - Sharp Aquos LC-32A33X Operation Manual

Settings when using external devices
Selecting the input source and
signal type

Selecting input source

Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Press TV/VIDEO on the remote control unit or
1
on the TV.
Press TV/VIDEO on the remote control unit or
2
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a / b .
38
32A33X_en_f.indd 38 32A33X_en_f.indd 38

Selecting input signal type

For setting the signal type of external equipment.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Input Select", and then
3
press ENTER.
Press a / b to select a signal type you want to
4
set, and then press ENTER.
Input source Selectable item
INPUT 1 Auto, COMPONENT, S-VIDEO, VIDEO
INPUT 2 Auto, COMPONENT, VIDEO
NOTE
• If no colour image displays, try changing the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to "Auto", the input terminal
where a cable is connected is automatically selected.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1: COMPONENT s S-VIDEO s VIDEO
INPUT 2: COMPONENT s VIDEO
2008-1-4 20:15:53 2008-1-4 20:15:53