Settings when using external devices
Selecting the input source and
signal type
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Press TV/VIDEO on the remote control unit or
1
on the TV.
Press TV/VIDEO on the remote control unit or
2
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a / b .
40LX710H_en.indd 47
40LX710H_en.indd 47
Selecting input signal type
For setting the signal type of external equipment.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "Option".
3
Press a / b to select "Terminal setting", and
4
then press ENTER.
Press a / b to select "Input select", and then
5
press ENTER.
Press a / b to select a signal type you want to
6
set, and then press ENTER.
Input source
Selectable item
INPUT 6
Auto, COMPONENT, S-VIDEO, VIDEO
INPUT 7
Auto, COMPONENT, VIDEO
NOTE
• If no colour image displays, try changing the other signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to "Auto", the type of the input
signal from a connected cable is automatically set up.
• When the signal type is set to "Auto" and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 6: COMPONENT s S-VIDEO s VIDEO
INPUT 7: COMPONENT s VIDEO
47
2010/04/15 16:12:36
2010/04/15 16:12:36