Set-Up Of Other Shock Models - Scott Genius 700 User Manual

•

SET-UP OF OTHER SHOCK MODELS

SCOTT strongly recommends using only the FOX Nude (FOX CTD shock) with the
Genius bike, as we designed both parts for a perfect matching combination with a linear
suspension rate.
Also on those shock models the SAG should be 14/12.5mm.
Other Shock Models on Genius
If you want to use a different rear shock model than the one originally on the bike, please
make sure that the shock will not in any position hit the frame and cause a damage to
the frame.
Please follow the instruction below:
- Please make sure that the rear shock or its accessory parts do not touch the frame when
mounting or suspending.
- For doing so release the air/remove the coil, install the shock and compress the shock
completely.
- If the shock touches the frame while doing so, do not use this shock in order to avoid
damage to frame, swingarm or shock.
•
HEADSET OPTIONS
Genius features a tapered headset and fork steerer
system to match with semi-integrated headsets
of the "50-61"mm range with ID of Headtube of
44.0mm on top and 54.9mm on the lower end.
Ritchey WCS Carbon Zero Tapered
Ritchey PRO Tapered
| 18 ENGLISH
PF 50-61mm 18mm UD PRD 13636
PF 50-61mm 12 9mm PRD 13640
GENIUS | 2016 BIKE USER MANUAL
It is also possible to use forks with a standard 1 1/8" steerer tube when using a reducer
headset such as e.g.
Ritchey WCS Carbon Zero Tapered PF 50-61mm
•
BOTTOM BRACKET (BB) ON GENIUS
All frames of Genius (carbon and alloy) have a BB shell for BB92PF standard.
This matches to several bearing and crankset models of Shimano, SRAM, FSA and others.
Please note that you do not need anymore a spacer on the right side of the bearing cup
between frame housing and bearing cup.
2016 BIKE USER MANUAL | GENIUS
18mm UD for 1 1/18" fork PRD 14860
ENGLISH 19 |