Fitting The Batteries; Unico Master And Wall Split Remote Control; Description Of The Remote Control - Olimpia splendid Unico Twin Instructions For Installation, Use And Maintenance Manual

3
3.2.2

Fitting the batteries

Replace both batteries at the same time.
To insert the batteries remove the spring-latch cover on the back of the remote control.
Close the spring-latch cover after inserting the batteries.
3.3

UNICO MASTER AND WALL SPLIT REMOTE CONTROL

3.3.1

Description of the remote control

Buttons: used to set or bring up machine functions.
T1
T2
T3
T4 Operating mode selector.
T5 Fan speed selector.
T6 Button for setting timer and programs.
T7
T8
T9
T10 Reset button.
T11 Program start button.
Display
D1 Fan speed or automatic operating mode indicator (AUTO).
D2 Heating.
D3 Cooling.
D4
D5 Air change activation (not available in this model).
D6
D7
D8
D9
D10
operating and NIGHT MODE buttons.
3.3.2 General power-on and management of UNICO MASTER and WALL SPLIT
be in "I" position.
The maximum distance for transmission of commands is about 8 meters.
3.3.3 Turning the unit ON/OFF
In case of prolonged stop of the machine, it must be deactivated turning the main switch off or unplugging the machine
from the mains.
52