Preference Settings; Choose A Base To Use With A Handset - Bang & Olufsen BeoCom 6000 Manual

48
Alternatively, you can choose AUTO
SELECT. The handset then searches
for another base if the signal to the
current base is lost.
'Common' Phonebook, Redial and
Caller ID lists are only accessible
when the handset is set for use
with base number 01.

Preference settings

Choose a base to use with a handset

If a handset is registered to several bases, you can choose which
base to use via the SELECT BASE menu. An available base is
identified in the display by its PARK number, which you also can
find on the bottom or back of the base. Any outgoing calls in
progress are lost when you change the setting and switch to a
different base!
MENU
OK
OK
BASE 01/01
36-000077123456
OK
If you have more than one base in your home or office and receive an
incoming call, the base receiving the call determines which handsets will
ring. A call received by only one base is sent onward only to handsets
preset for use with that base.
Press then MENU to access the main menu
Turn the wheel to select the HANDSET/BASE
menu and press OK to access the menu
Turn the wheel until SELECT BASE is shown and
press OK to select a base
Turn the wheel to view the available bases
Press OK to select a base