Table of Contents
Advertisement
The Handset/Base menu options
HANDSET NAME... Name a handset. Refer to page 9.
SELECT BASE... Choose a base for the handset. Refer to page 48.
REGISTER BASE... Register a base to a handset. Refer to page 51.
REMOVE BASE... Remove a base from a handset. Refer to page 50.
REMOVE HANDSET... Remove a handset from the base. Refer to page 50.
COMMON... Set up the handset with a common Phonebook and
common lists. Refer to page 34.
PERSONAL... Set up the handset with a personal Phonebook and personal
lists. Refer to page 34.
AUTO REGISTER... Disconnect or connect automatic registration of the
first handset. Refer to pages 6–8.
PIN CODE... Enter a PIN code when registering a handset with a base.
Refer to page 49.
The Setup menu options
CLOCK... Set the clock, the date and the year.
QUIET PERIOD... Set a period of time in which the battery alarm is
deactivated.
ALERT SIGNAL... Set the flashing of the handset's indicator light.
Options are YES and NO.
KEYPAD LOCK... Set the keypad lock. Options are ON (keypad locked),
OFF (keypad unlocked) and AUTO ON (keypad locks automatically after
a call).
AUTO OFF HOOK... Set the handset to answer an incoming call
automatically when the handset is lifted off the charger. Options are
YES and NO.
SWITCHBOARD... Set BeoCom 6000 for use with a switchboard. Options
are YES and NO. If you choose YES, use the number keys to enter a
prefix code and turn the wheel to select a pause length. You can select
a pause length between 0 and 12 seconds, or select 'Wait'.
53
Hide quick links:
Advertisement
Table of Contents
