12
SET CLOCK
SET CLOCK
08:23
08:23
26. OCT
26. OCT
CALLER ID
REDIAL
A
V
1
2
4
5
MENU
7
8
0
The display is illuminated when the
handset is in use.
>> Get started with BeoCom 6000
The BeoCom 6000 handset
The handset is automatically switched on when placed in the
charger. If you switch off the handset, you cannot make a call and
the handset does not signal incoming calls.
Switch off the handset...
PHONEBOOK
Switch on the handset...
C
Display overview
Depending on the state of the handset, different messages can appear
when you press OK. Turn the wheel to view them.
BATTERY FLAT
3
NO SIGNAL
6
PAUSE
LINE BUSY
9
R
5 CALLER ID
117 FREE
ENTRIES
PERSONAL
HANDSET
Press and hold for 4 seconds to switch off the
handset, or...
press
MENU
Turn the wheel to select POWER OFF and press
OK
OK (middle of wheel) to switch off the handset
Press to switch on the handset, or place the
handset in the charger
The battery requires recharging.
The signal between handset and base is lost, or
there is no power to the base.
No line is available, or the plug-in unit is not
connected to the socket.
There are 5 new Caller ID calls.
There are 117 free entries in the Phonebook.
The handset has a personal Phonebook, Redial
list and Caller ID list, all stored and updated by
the handset instead of the base.
then MENU