Battery Status; Replacing The Battery; Inserting Batteries - Bang & Olufsen BeoCom 6000 Manual

Hide thumbs Also See for BeoCom 6000:
Table of Contents

Advertisement

Battery status

The battery indicator in the display shows the capacity or talk time
left in the handset. 6 symbols are available for the battery
indicator:
You can display the battery charging status in the handset at any time by
pressing OK. If the batteries require charging, this appears automatically
in the display and the handset warns you with an audible signal.

Replacing the battery

Removing the battery...
> Remove the battery cover; press the cover lightly and slide it off.
> Remove the battery and pull out the battery plug.

Inserting batteries...

> Insert the battery plug (A) and place the battery and the cords as
shown.
> Replace the battery cover, make sure that the tabs and the slots snap
into place correctly at the top and bottom of the cover.
If the battery in the handset is replaced with a new battery, please follow
the instructions accompanying the new battery.
117 FREE ENTRIES
117 FREE ENTRIES
CALLER ID
REDIAL
PHONEBOOK
100% charged
80% charged
60% charged
40% charged
20% charged
0% charged
A
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents