Two Calls At The Same Time – Call Waiting - Bang & Olufsen BeoCom 6000 Manual

40
If you do not want to be disturbed
by ringing signals from other
handsets or by a Call Waiting beep
in your handset, do not activate Call
Waiting. In this situation, a person
calling you will hear a busy tone.
>> If you have a BeoLine ISDN base...
Two calls at the same time – Call Waiting
To be able to receive a second call on the same telephone number
during a call, you must first activate Call Waiting. If a second party
calls during a conversation, you hear a beep in your handset, and
handsets set up to react on the specific number ring. The number
of the incoming call is shown in the display. If the name is stored in
the Phonebook, the name is shown as well.
Your choices upon receiving a call:
EXT HOLD&SHIFT... Set the active call on hold and change to the new call
EXT IGNORE... Ignore the new call and continue the active call
EXT END&SHIFT... End the active call and change to the call on hold
Your choices while a call is on hold:
EXT HOLD&SHIFT... Change between two calls
EXT END&SHIFT... End the active call and change to the call on hold
EXT CONFERENCE... Start a three-party call with the active call and the
call on hold
BeoLine ISDN is preset at the factory with Call Waiting deactivated. If you
choose to keep this setting, the other handsets can still ring during a
conversation. This happens if you have an MSN subscription and the
following two conditions apply:
– You are using a handset set to code 1 or 2, and...
– An incoming call is directed to an MSN number other than the one your
handset has.