Register A Handset To A Base Manually; When The Handset Has Located The Base; If Enter Pin Is Displayed - Bang & Olufsen BeoCom 6000 Manual

Register a handset to a base manually

If you already have a BeoCom 6000 phone system and wish to
register one or more of these handsets with a new base, follow the
procedure described below.
MENU
OK
OK

When the handset has located the base...

BASE 01/01
36-000077123456
OK

If ENTER PIN is displayed...

0 – 9
OK
REGISTER BASE
COMPLETED
Open the new base for registration as described
on pages 6–7.
Press then MENU to access the main menu
Turn the wheel to select the HANDSET/BASE
menu and press OK to access the menu
Turn the wheel until REGISTER BASE is shown
and press OK to search for a base
The display informs you that the base has been
located
Turn the wheel to view the available bases.
Compare the PARK number in the display with
the number on the base
When the numbers match, press OK.
Registration begins automatically
Enter the PIN code and press OK
To be able to register handsets
automatically to the new base, you
must first cancel the registration to
the current base, as described on
page 48. Refer to pages 6–8 for
information about automatic
registration of a handset to a base.
51