Settings; The Setup Menu; Display News; Auto Offhook - Bang & Olufsen BEOCOM 2 Manual

30
Setup menu
OK
Ringer level:
Time & date:
13:45 3 Apr

Display News:

On

Auto offhook:

On
Advanced
menu
OK
OK

Settings

These menus contain several options which
allow you to connect, disconnect or adjust
BeoCom 2 functions.
Select your settings...
> Push the Track point down until 'Setup menu'
appears on the display.
> Press OK to select the menu.
> Push the Track point down to select the
settings menu required. For advanced settings,
select 'Advanced menu'.
> Press OK to make a selection.
> Use the Track point to change settings, or to
switch features on or off - push it either to the
left or to the right, up or down.
> Press OK to store the setting.

The Setup menu

Ringer level... The volume can be set to 'Ringer
off', 'Low', 'Medium' or 'Loud'. The ringer
signal selected is played after a moment. If you
disconnect the ringer signal, the phone will not
ring, but it will still register the call in the Caller
ID list. The ringer signal is disconnected until
you choose another setting.
Time and date...Set the day, month, year and
time.
Display news... The news indication is switched
on when you purchase the phone, so that you
can use 'Information' to see how many new
calls you have received.
Auto offhook... Switch Auto offhook on if you
want your BeoCom 2 to be ready to answer a
call as soon as you lift the handset from the
charger. Auto offhook is switched off when you
purchase the phone. Auto offhook can only be
used if the handset is placed in the charger. If
the handset is not placed in the charger, you
must always press to answer a call.