Table of Contents
Advertisement
Phone feedback – indicator lights
Indicator light on the BeoCom 6000 base
The two-colour indicator light on the base lights up in:
Green... The base is on and the handset is placed correctly for charging.
Red... Charging impossible. Place the handset correctly in the charger.
Red flashes... The base is open for registration of handsets.
Indicator light on the BeoLine ISDN base
The light is located at the back and lights up in:
Red... The base works normally.
Slow flashes... The base is ready for registration of handsets.
Quick flashes... The connection is faulty.
Indicator light on the handset
The indicator light flashes red when...
– The phone rings
– Unanswered Caller IDs are registered
– No line is available
– The base is not connected to the power supply and the signal between
the handset and the base is lost
– The handset is out of range of the base
Find out why the handset indicator light is flashing...
OK
Press to open the display
Turn the wheel to see the relevant causes one by
one
Indicator light
Indicator light
Indicator
light
You can turn off the handset
indicator light, or alert signal. Refer
to pages 52–53 for further
information.
11
Hide quick links:
Advertisement
Table of Contents
