Total Overview Sam Modes; Ssb Identification - Philips 40PFL8008K/12 Service Manual

6.5.1

SSB identification

Whenever ordering a new SSB, it should be noted that the
correct ordering number (12nc) of a SSB is located on a sticker
on the SSB. The format is <12nc SSB><serial number>. The
ordering number of the correct "Service" SSB is the one
preceded by the letter "S" in case 2 or more ordering numbers
are present on the bar code sticker.
6.6

Total Overview SAM modes

Table 6-14 SAM mode overview
Main Menu Sub-menu 1
Hardware Info A. SW version
B. Standby processor version e.g. "STDBY_77.3.11.16"
C. Production code
Operation hours
Errors
Reset error buffer
Alignment White point
Ambilight
Option numbers Group 1
Group 2
Store
Initialise NVM
Store
Software maintenance Software events
Hardware events
Test setting Digital info
Install start frequency
Install end frequency
Default install frequency
Installation
Alignments
Sub-menu 2 Sub-menu 3
e.g. "QF2EU_0.49.1.0
e.g. "see type plate"
Colour temperature Normal
Warn
Cool
White point red
White point green
White point blue
Select module
Brightness
Select matrix
e.g. "00008.00001.15421.02239"
e.g. "44816.34311.33024.00000"
Display
Clear
Test reboot
Test kernel crash
Test application crash
Display
Clear
Current frequency: 538
QAM modulation: 64-qam
Symbol rate:
Original network ID: 12871
Network ID: 12871
Transport stream ID: 2
Service ID: 3
Hierarchical modulation: 0
Selected video PID: 35
Selected main audio PID: 99
Selected 2nd audio PID: 8191
000
999
Digital only
Digital + Analogue
back to
div. table
QFU1.2E LA
Figure 6-1 SSB identification
Description
Display TV & Standby SW version and CTN serial
number
Displays the accumulated total of operation hours.TV
switched "on/off" & every 0.5 hours is increase one
Displays the most recent errors
Clears all content in the error buffer
3 different modes of colour temperature can be
selected
LCD White Point Alignment. For values,
see Table 6-5 White tone default settings 46" PFL
series to 6-8 White tone default settings 55" PFL
series
The first line (group 1) indicates hardware options 1
to 4
The second line (group 2) indicates software options
5 to 8
Store after changing
N.A.
Select Store in the SAM root menu after making any
changes
Display information is for development purposes
Display information is for development purposes
Display information is for development purposes
Install start frequency from "0" MHz
Install end frequency as "999" MHz
Select Digital only or Digital + Analogue before
installation
6. EN 43
18310_221_090318.eps
090319
2014-Jan-10