Figure 4-17 Rear cover removal Ambilight models -2-
Ambilight units in Rear Cover
The Ambilight units are affixed in the rear cover and will self-
destruct upon removal.
Attention: it is of the utmost importance to remove all remains
of any adhesive that might be left on the inside of the rear
The new units come with double-sided adhesive tape. Ensure
a correct mounting to avoid uneven light emission of the units.
Some SSBs have a dedicated LVDS connector, requiring
pressing two catches as indicated in the figure, before
removing the LVDS cable.
Figure 4-18 SSB LVDS connector catches (optional) -1-
Upon re-connecting the LVDS cable, ensure the catches are
locked after having inserted the LVDS cable.
Figure 4-19 SSB LVDS connector catches (optional) -2-
To re-assemble the whole set, execute all processes in reverse
While re-assembling, make sure that all cables are placed
and connected in their original position.
Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
LVDS flat foil