White Tone Default Settings 40" Pfl Series; White Tone Default Settings 42" Pfl Series; White Tone Default Settings 46" Pfl Series; White Tone Default Settings 46" Pdl Series - Philips 40PFL8008K/12 Service Manual

• Select a COLOUR TEMPERATURE (e.g. COOL,
NORMAL, or WARM).
• Set the RED, GREEN and BLUE default values according
to the values in Table 6-5.
• When finished press OK on the RC, then press STORE (in
the SAM root menu) to store the aligned values to the NVM.
• Restore the initial picture settings after the alignments.
Table 6-3 White tone default settings 40" PFL series
White Tone 40PFL8008/x
Colour Temp R
Normal 127
Cool 123
Warm 127
Table 6-4 White tone default settings 42" PFL series
White Tone 42PFLxxx8/x
Colour Temp R
Normal 127
Cool 120
Warm 127
Table 6-5 White tone default settings 46" PFL series
White Tone 46PFL8008/x
Colour Temp R
Normal 127
Cool 124
Warm 127
Table 6-6 White tone default settings 46" PDL series
White Tone 46PDL8908/x
Colour Temp R
Normal 127
Cool 127
Warm 127
Table 6-7 White tone default settings 47" PFL series
White Tone 47PFL6xx8/x
Colour Temp R
Normal 127
Cool 126
Warm 127
White Tone 47PFL7xx8/x
Colour Temp R
Normal 127
Cool 123
Warm 127
Table 6-8 White tone default settings 55" PFL series
White Tone 55PFL6xx8/x
Colour Temp R
Normal 127
Cool 127
Warm 127
White Tone 55PFL7xx8/x
Colour Temp R
Normal 127
Cool 127
Warm 127
G B
110 110
115 127
99 72
G B
118 116
120 127
108 74
G B
99 108
102 125
87 71
G B
92 92
98 110
84 58
G B
105 98
112 124
95 58
G B
109 110
112 127
96 63
G B
99 97
107 118
87 54
G B
97 101
102 122
85 58
back to
div. table
Alignments QFU1.2E LA
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-9 White tone default settings 55" PDL series
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-10 White tone default settings 60" PFL series
White Tone
Colour Temp
Normal
Cool
Warm
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-11 White tone default settings 65" PFL series
White Tone
Colour Temp
Normal
Cool
Warm
Table 6-12 White tone default settings 84" PFL series
White Tone
Colour Temp
Normal
Cool
Warm
6.3.2 Ambilight
Each ambient light module is aligned by a matrix and by the
brightness. After replacement of a spare module, the
brightness/color can be adjust/fine-tuned according the
neighbouring modules.
1. Go to SAM.
2. Select "Alignments".
3. Select "Ambilight". A white test pattern shall be displayed
by the ambilight modules.
4. Select the number of the module that have to be aligned.
Module 1 is the first one which will come across according
the wiring path, starting at the small signal panel,
proceeding towards the ambient light modules one by one
after the other. The first module will be attached to the next
module 2. Module number 2 to number 3 etc. Herewith the
way to define the ambilight module numbering.
5. Align the brightness, use as reference the neighbouring
modules output. Adjust now by eye side, the brightness is
automatically stored.
6. Select one of 10 matrixes which color matches most with
the neighbouring modules. (see table
matrix correction table).
7. The alignment is stored automatically (tip: don't switch off
the set immediately after the alignment is done, automatic
storage can require a time frame of 10 seconds).
6. EN 41
55PFL8008/x
R G B
127 103 113
122 103 127
127 90 74
55PDL8908/x
R G B
127 96 98
127 100 116
127 88 59
60PFL6008/x
R G B
127 108 103
127 115 121
127 96 63
60PFL8708/x
R G B
127 123 91
124 125 111
127 118 51
65PFL9708/x
R G B
125 123 125
113 115 127
127 113 89
84PFL9708/x
R G B
127 112 118
120 111 127
127 104 79
"6-13 Overview
2014-Jan-10