Adjusting The Throttle Cable Free Play - Yamaha YZF-R1 2007 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
NOTE:
"dIAG" appears on the odometer, tripmeter and
fuel reserve trip LCD.
3. Press the "SELECT" button to select the
CO adjustment mode "CO" or the diagnos-
tic mode "dIAG".
4. After selecting "CO", simultaneously press
the "SELECT" and "RESET" buttons for 2
seconds or more to execute the selection.
5. Press the "SELECT" and "RESET" buttons
to select a cylinder.
NOTE:
The selected cylinder number appears on the
odometer, tripmeter and fuel reserve trip LCD.
• To decrease the selected cylinder number,
press the "RESET" button.
• To increase the selected cylinder number,
press the "SELECT" button.
6. After selecting the cylinder, simultaneously
press the "SELECT" and "RESET" buttons
for 2 seconds or more to execute the selec-
tion.
email: info@motomatrix.co.uk
7. Change the CO adjustment volume by
pressing the "SELECT" and "RESET" but-
tons.
NOTE:
The CO adjustment volume appears on the
tripmeter LCD.
• To decrease the CO adjustment volume,
press the "RESET" button.
• To increase the CO adjustment volume,
press the "SELECT" button.
8. Release the switch to execute the selec-
tion.
9. Simultaneously press the "SELECT" and
"RESET" buttons to return to the cylinder
selection (step 5).
10. Turn the main switch to "OFF" to cancel the
mode.
EAS20630
ADJUSTING THE THROTTLE CABLE FREE
PLAY
NOTE:
Prior to adjusting the throttle cable free play,
the carburetor synchronization should be
adjusted properly.
1. Check:
• Throttle cable free play "a"
Out of specification → Adjust.
Throttle cable free play
3.0–5.0 mm (0.12–0.20 in)
2. Adjust:
• Throttle cable free play
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
Handlebar side
a. Loosen the locknut "1".
b. Turn the adjusting nut "2" in direction "a" or
"b" until the specified throttle cable free
play is obtained.
3-9
ENGINE